Last updated November 17, 2026
New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Boulder City pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
Door Installation Warning Signs Every Homeowner Should Know
A door that sticks in summer and gaps in winter is not a hardware problem. It is an installation problem wearing a product problem’s clothes. The warning sign usually appeared weeks earlier, on quote day, when nobody measured the moisture content of the rough opening or wrote down the shim schedule. Across the 18,000+ openings our technicians have handled, the failures we get called to inspect almost always trace back to something missing from the paperwork before a single screw was driven. This guide teaches you to audit the installer, not just the finished door: the pre-installation red flags, the visible tells during framing, and the checks you can run yourself within 30 days. If you are scheduling door installation in Boulder City, read this first.
Quick Answer

The clearest warning signs of a bad door installation are: a quote issued without an in-person measured survey, no line-item for shimming or threshold adjustment, no moisture reading of the rough opening, exposed fasteners on flashing, and no written photo record at job close. Any one of these means the install is being managed by guesswork. Two or more means you should get a second written estimate before signing.
Before
AfterTable of Contents
- The Paper Trail Problem: Why Failures Start on Quote Day
- Pre-Installation Red Flags to Catch Before You Sign
- What Properly Shimmed and Plumbed Framing Looks Like
- Flashing, Weatherstrip, and Air Sealing: Signs of a Rushed Job
- Your 30-Day Post-Installation Inspection Checklist
- Why a Photo Record Is Your Only Defense
- Boulder City Climate and Code: What Local Installs Must Account For
- What Door Installation Warning Signs Cost You in Boulder City
The Paper Trail Problem: Why Failures Start on Quote Day

Every install failure we have investigated left a trail. Sometimes it was a single sheet of paper with a total price and no scope. Sometimes it was a verbal promise to “handle the threshold.” Sometimes it was a survey photo that showed a rotted sill plate nobody flagged. The point is consistent: the door was not the problem. The record around the door was.
A properly managed installation produces a stack of documents you keep. The measured survey records the rough opening dimensions, the framing squareness, the sill condition, and the moisture reading of the substrate. The written quote references those specific measurements, line by line, including shim allowance and threshold adjustment. The final invoice matches the quote, because the measurement and the price came from the same source. That is Haven Clause 1 in practice: the price is written before anyone starts.
When a quote arrives without a matching survey, or the survey arrives after you’ve already signed, you are looking at an installer who plans to figure it out on site. In Boulder City’s dry, high-desert climate, figuring it out on site is how doors end up with seasonal gaps six months later. For a full picture of what a documented install looks like end to end, see our Sightline Windows & Doors Boulder City home page, which explains the Haven Standard clause by clause.
Pre-Installation Red Flags to Catch Before You Sign
These are the signs you can spot before anyone touches a tool. Run through this list against every quote you receive.
- No written measured survey. If the installer quotes from a photo, a floor plan, or a “standard size” assumption, the number is fiction. Doors are not standard. Rough openings in homes built between 2015 and 2025 vary by fractions of an inch that matter.
- Quote issued without an in-person visit. A phone quote for a door install is a guess with a dollar sign attached. There is no way to assess sill condition, header sag, or existing flashing without standing in front of the opening.
- No line-item for shimming. Shim allowance is not optional. Plumb and square depend on it. A quote that folds shimming into a lump-sum labor figure is hiding work you cannot verify.
- No line-item for threshold adjustment. Threshold adjustment is where most door install budgets quietly blow up. If it is not written down, it will be added later, or skipped.
- No moisture reading documented. A moisture meter reading of the rough opening and sill is the single best predictor of whether a door will swell, bind, or gap. No reading means no baseline.
- No mention of flashing or weatherstrip specification. Ask which weatherstrip product and which flashing method. A confident installer answers in specifics.
Bring any quote you’ve received to us and we will review it at no charge. We offer a free second opinion on any written estimate, and we will tell you plainly what is missing.
What Properly Shimmed and Plumbed Framing Looks Like

During install, the frame reveals everything. A properly shimmed door is plumb in both directions, square across the diagonals, and sitting on shims placed at hinge points and latch points. Plumb means the frame is true vertically; square means the diagonal measurements from corner to corner match. Those are the two readings that determine whether the door swings cleanly for the next 20 years.
Here are the visible tells that shimming was skipped:
- Diagonal gaps at the head and sill. A gap that tapers from one jamb to the other means the frame is racked out of square.
- Binding at the latch side. If the door rubs near the strike plate as it closes, the latch jamb is likely shimmed too tight or not at all.
- Shims visible only at the hinge side. Symmetric shimming matters. Hinge-only shimming throws the frame out of plumb on the latch side.
- No shims at all behind the jamb. Some installers foam the gap and call it done. Foam is not structure.
If you are watching the install, ask the technician for the diagonal measurements before the trim goes on. A real crew takes them and writes them down. Our technicians have up to 14 years of experience and treat that measurement as the start of the job, not a formality. For the parallel process on windows, our Window Installation in Boulder City guide covers the same shimming discipline applied to glazing units.
Flashing, Weatherstrip, and Air Sealing: Signs of a Rushed Job
Flashing is the metal or membrane system that sheds water away from the door opening. In Boulder City’s climate, rain is infrequent but intense when it comes, and wind-driven dust finds every gap. A rushed flashing job announces itself in three visible ways.
- Exposed fasteners on the flashing. Every screw head puncturing the flashing is a future leak. Proper installs lap the flashing over the fasteners or seal each head with compatible sealant.
- Compressed weatherstrip on delivery day. If the door arrives with the weatherstrip already flattened, it was stored or shipped badly. Flattened weatherstrip will not seal.
- Foam-only air sealing, no backer rod. Expanding foam alone in a wide gap deforms as it cures and leaves voids. Backer rod fills the void first, then foam seals around it. Skipping the backer rod is a common shortcut.
Ask the crew which flashing method they use before they arrive, and take a photo of the flashing detail before the trim covers it. That photo becomes part of your record. For more on what changes when you replace rather than install, see our guide to Window Replacement in Boulder City, where flashing methodology is identical.
Your 30-Day Post-Installation Inspection Checklist

Once the trim is on and the crew is gone, you are the inspector. Run these three checks within the first 30 days, in this order, and write down what you find.
- Operational force test. Open and close the door one full cycle. A properly installed door opens with light effort and closes with a soft pull. If you feel binding at any point in the swing, the frame is out of plumb. Do this in the morning and late afternoon; temperature swings reveal problems the midday check misses.
- Light-gap inspection. Close the door on a sunny day and stand inside. No daylight should be visible between the slab edge and the weatherstrip at the head, latch jamb, or strike jamb. A continuous thin line of light anywhere in that gap means the weatherstrip is not making contact.
- Threshold sweep contact verification. Close the door and run your hand along the bottom sweep from hinge to latch. You should feel uniform contact between sweep and threshold across the full width. Any spot where the sweep lifts off the threshold is a draft path.
If any of the three fails, document it with a photo and a short note describing the condition, the date, and the outside temperature. That record is what makes a warranty claim work. The 365-Day Done Right Promise on our installs means if the door is not right, we make it right, and the written record is how we both agree on what “right” looks like.
Why a Photo Record Is Your Only Defense
The most common dispute we hear from homeowners about installers who did not document their work is the phrase “that was pre-existing.” It is almost impossible to argue against without evidence. If the installer did not photograph the rough opening before starting, you cannot prove the sill rot, the sagging header, or the cracked flashing was there when they arrived.
A documented photo record changes that equation. When the crew photographs the rough opening, the flashing detail, the shim placement, and the final seal, you and the installer share the same record. Disputes become checkable facts. On every job we complete, the photo record is standard, not an upsell: it is Haven Clause 4, Evidence on Every Job. Ask any installer you consider whether they provide one. If the answer is vague, keep looking.
Boulder City homeowners who bought between 2015 and 2025 are often the second or third owner of their home, which makes the pre-existing question sharper. Nobody knows what the previous owner’s contractor did. The photo record is the only way to start clean.
Boulder City Climate and Code: What Local Installs Must Account For

Boulder City is not a mild climate for doors. Summer surface temperatures on a south-facing door slab regularly exceed 140°F, and the swing between an August afternoon and a January morning can exceed 50 degrees. That swing is what exposes a poor install. A door that is shimmed too tight at the hinge side will bind in summer and gap in winter. Seasonal movement is not a defect; it is a measurement. The installer who plans for it writes the shim allowance into the quote.
Two local specifics worth raising with any installer:
- Sill plate moisture. Even in the desert, irrigation against a slab can push moisture into a wood sill plate. A moisture reading on every door install in Boulder City is not overkill. It is the difference between a door that lasts and a door that swells and sticks.
- Wind-driven dust and air sealing. Las Vegas Valley wind events push fine dust through any gap in air sealing. Proper backer rod and foam, not foam alone, is what stops it. This is a detail installers who work only in wetter climates often miss.
Product specification matters too. We install doors from PGT and Therma-Tru, specified by what each opening requires rather than by what is in stock. PGT’s impact-rated line suits the wind exposure in the valley; Therma-Tru’s fiberglass and steel lines hold finish through Boulder City’s UV load. The right product on the wrong install fails. The right install on a mid-tier product holds. For more on how we specify by opening, see the product brief on our home page linked above.
What Door Installation Warning Signs Cost You in Boulder City
The cost of catching a warning sign is zero. The cost of missing one is measured in rework. Here is what Boulder City homeowners typically face when the install is done badly:
- Threshold adjustment rework: $180 to $450, plus the original install you already paid.
- Flashing repair after a wind-driven rain event: $250 to $650, depending on the trim removal required.
- Full frame re-shim and re-hang: $400 to $900, because the trim comes off and the interior paint follows.
- Weatherstrip replacement on a new door: $80 to $200 in parts and labor, 6 to 12 months after install.
- Subfloor or sill plate repair from water intrusion: $1,200 and up, because that is a carpentry and drying job, not a door job.
None of these numbers appear on a bad installer’s quote. They appear on the next contractor’s invoice. A written measured survey and a line-item quote are how you avoid all five. Call (833) 847-4018 for an exact quote on your Boulder City door; estimates are free, and the price is written before any work starts.
Common Mistakes to Avoid

- Accepting a phone quote on a door. Doors are not standard sizes. A phone quote is a placeholder, and placeholder prices grow once the rough opening is measured.
- Letting the installer skip the moisture reading on the sill plate. In Boulder City, irrigation against the slab is common, and a wet sill is the number one cause of a door that swells within a year.
- Approving an install without a written shim allowance. Shim allowance is the line that determines whether your door stays plumb through the first summer.
- Not photographing the flashing before trim goes on. Once the trim is up, you cannot verify the flashing detail without tearing it off.
- Assuming foam alone is a full air seal. Foam without backer rod deforms and leaves voids. Wind-driven dust in Boulder City finds every void.
- Skipping the 30-day operational force test. A door that binds in the first month is a door that will gap in the first year. Catch it before the warranty window narrows.
- Choosing an installer without a 365-day written promise. A verbal assurance is not a warranty. A one-year written commitment is.
When to Call a Professional
Call a professional installer when any of these apply: your door binds or gaps and you have not yet identified a written scope, your current installer has quoted without a measured survey, your flashing is exposed and you can see fasteners, your weatherstrip has flattened within the first year, or your threshold sweep has lost contact with the sill. All of these are signs the install is either incomplete or headed for rework. This is not a job for a homeowner with a pry bar and YouTube. Doors carry structural load, and a mis-shimmed frame compromises both the weather seal and the opening’s integrity. Sightline Windows & Doors Boulder City offers free estimates in Boulder City: call (833) 847-4018 to schedule your survey.
Frequently Asked Questions

Start with the three checks: operational force, light gap, and threshold sweep contact. A door installed badly will show at least one of these within 30 days. The most common visible sign is binding at the latch side, which points to a frame that is out of plumb. A second sign is daylight visible at the weatherstrip on a sunny day. Photograph both and call a professional for a second opinion. Call (833) 847-4018 for a free estimate.
A proper Boulder City door quote should include a written measured survey with rough opening dimensions, a moisture reading of the sill plate, a line-item for shim allowance, a line-item for threshold adjustment, and a specified flashing and weatherstrip product. Anything less is incomplete. The quote and the final invoice should be the same document. Call (833) 847-4018 for an exact written quote before any work starts.
Rework typically runs from $180 for a threshold adjustment to $1,200 and up if water intrusion has reached the sill plate. Full re-shim and re-hang runs $400 to $900 because trim must come off. All of these are avoidable with a documented install. Call (833) 847-4018 for a free estimate on getting it corrected.
For a like-for-like replacement, a permit is often not required. For an opening change (widening, relocating, or changing the swing), Boulder City code typically requires a permit and subsequent inspection. Ask in writing which category your install falls under, and get the answer before signing. We pull permits where required and the inspection passes before final payment. Call (833) 847-4018 to confirm what your project requires.
A standard single pre-hung exterior door install runs 4 to 6 hours with a two-person crew. An opening change with framing modifications takes 1 to 2 days. The measured survey adds about an hour before the install day and prevents the change-order delays that stretch the actual job. Call (833) 847-4018 for a written schedule with your estimate.
A door that sticks in summer and gaps in winter was shimmed too tight at the hinge side or not plumb, so seasonal wood movement pushes it out of square. In Boulder City’s 50-degree-plus temperature swings, this reveals itself within the first year. It is fixable with a re-shim, not a door replacement. Call (833) 847-4018 to schedule an inspection and a free written estimate.
The Bottom Line
Door installation warning signs read like a checklist of things that did not get written down. No measured survey, no shim line-item, no moisture reading, no flashing photo, no written warranty. The finished door is the last thing to fail, and the first thing everyone blames. If you remember one instruction from this guide, make it this: ask for the written scope before you sign, and photograph the install as it happens. The Boulder City homeowners we work with who follow that rule are the ones who never call us with a door that sticks in July. They call us because the door they installed five years ago still closes with a soft pull. Call (833) 847-4018 for your free estimate.
Written by the team at Sightline Windows & Doors Boulder City.
Six Reasons Homeowners Choose Sightline Windows & Doors Boulder City

Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Boulder City Services
What Neighbors Say About Sightline Windows & Doors Boulder City
