New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Boulder City pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
CGI Door Installation in Boulder City: What to Know First
CGI door installation in Boulder City is a scheduled job, not a same-day one: a measured survey comes first, the written price is fixed before anyone starts, and most entry and patio door replacements are completed in one to two working days once the door is on site. You’ll have the number in writing before we pick up a tool. This page is for homeowners who already own a CGI product, or who have a CGI quote in hand and want to know what the install actually involves before they sign.
We’re an independent CGI service provider – not affiliated with or authorized by CGI – and we install CGI entry doors, hurricane-rated front doors, French and double doors, replacement doors, and storm and exterior doors across Boulder City. Call (833) 847-4018 for a free estimate.
How CGI Products Fail – and How We Fix Them

CGI is a Florida-founded manufacturer, and its products are built for heat, humidity, and wind-driven rain. Boulder City throws something different at them: dry desert air, intense UV, and summer surface temperatures that climb past 150°F on a west-facing slab. Here’s what we actually see on CGI doors around town, and what we do about it.
- Thermal bow on fiberglass entry slabs (CGI Estate and Traditions lines). A fiberglass door facing west in Boulder City can bow 1/8 to 1/4 inch across a summer, because the sun-facing skin expands faster than the shaded one. Homeowners often blame the hinges. It’s usually the slab. We measure the bow with a straightedge before ordering anything, and if it’s within tolerance we fix it with a reinforced hinge pattern and a proper strike adjustment rather than selling a new door.
- Weatherstripping compression set. The kerf-mounted bulb weatherstrip on CGI doors takes a set after a few summers of 110°F afternoons, and you get daylight at the corners and a whistle on windy days. We replace it with a UV-stable EPDM bulb rather than the standard sponge product. The difference in service life out here is measured in years, not months.
- Threshold and sill seal breakdown (CGI sliding and patio doors). The vinyl threshold cap on a CGI slider cracks and the underlying wood sill starts taking water during monsoon season. We pull the door, inspect the sill pan, and reflash with a sloped sill pan and a weep system that actually drains. A new door on a bad sill just leaks again.
- Adjustable hinge drift on French and double doors. CGI double-door systems use adjustable hinges, and after a few years of daily use the active leaf sags enough to rub the astragal. That’s a 20-minute adjustment with the right tool, not a door replacement. We flag it honestly because it’s the single most common thing we get called out for that doesn’t need a new door.
- Hurricane-rated door frame fastener corrosion. On CGI impact-rated doors installed near the lake, we’ve found stainless fasteners mixed with non-stainless at the frame anchors, which is a warranty concern and a corrosion point. We spec all-stainless at the frame and document the fastener schedule in the photo record.
Two things worth knowing that CGI’s own site won’t tell you. First, CGI fiberglass entry slabs are finished with a factory gelcoat that needs a specific primer before any field paint, and most painters skip it – which voids the finish warranty and shows up as peeling within two summers in Boulder City. Second, the impact-rated door glazing CGI uses carries a different SHGC rating than the standard glazing, and if your west-facing door is swapped without checking it, your cooling load goes up.
Before
AfterOur CGI Door Installation Process
- 1
Measured survey. We measure the rough opening, check the frame for plumb and square, and photograph the existing conditions. You keep a copy of that survey – it’s the same document the quote is built from, so the written price can’t move later.
- 2
Written scope and price. You get a line-item quote before any work starts: door, hardware, flashing, trim, disposal, permits if the jurisdiction requires them. OEM CGI parts are specified where warranty coverage matters; quality aftermarket where it doesn’t. The quote names which is which.
- 3
Removal and prep. Old door out, rough opening cleaned, sill pan inspected and reflashed to slope correctly, frame squared and shimmed at the hinge points.
- 4
Installation. New CGI door set, plumbed and leveled, fastened on the schedule the manufacturer specifies, sealed with a backer rod and a UV-rated sealant, trim installed to match the existing exterior.
- 5
Function test. Door swings free, latch engages without a lift, weatherstrip seals all the way around, deadbolt aligns, glass is set with the correct glazing compound. We open and close it a dozen times and check the gaps with a feeler gauge.
- 6
Cleanup and photo record. Site cleaned, old door hauled away, and a documented photo record of the install delivered to you. Every job is covered by the 365-Day Done Right Promise.
What CGI Door Installation Costs in Boulder City

These are real installed ranges for Boulder City, door and labor together, based on what we see on scheduled jobs. Your exact number comes from the measured survey.
| Job | Typical installed range |
|---|---|
| CGI replacement entry door (standard fiberglass slab, hardware, trim) | $1,800 – $3,200 |
| CGI hurricane-rated front door, impact glazing, stainless fastener schedule | $3,400 – $6,200 |
| CGI French or double entry door set | $4,500 – $8,500 |
| CGI sliding patio door replacement, sill pan reflash included | $2,800 – $5,400 |
| Storm or exterior door, utility grade | $1,200 – $2,400 |
What moves the price: door size and whether the rough opening needs framing adjustment, impact-rated versus standard glazing, whether the existing sill pan is sound or needs a full reflash, finish (factory-painted versus field-painted with the correct primer), and permit requirements. Call (833) 847-4018 to schedule your free estimate – the written price won’t change after work starts.
Why Boulder City Homeowners Call Sightline Windows & Doors Boulder City for CGI Work
Every CGI door we install is covered by the 365-Day Done Right Promise, and every job leaves a documented photo record. Our technicians have up to 14 years of experience and are background-checked, uniformed, and identified by license number before they arrive. Calls are answered by a live person 24/7.
We’re not a CGI-only shop, and that matters when a part is backordered or a door model gets discontinued. We work eight manufacturer lines, including PGT, CWS, ES Windows, and ECO Window Systems, so if your CGI door is on a long lead time we can tell you what a comparable product runs and what the trade-offs are. We specify by what the opening requires, not by what’s easiest to get. Bring us a competitor’s estimate and we’ll review it free.
We’re independently owned and operated under the Haven Standard, which has governed every installation we’ve completed since 2012.
FAQs

It can, if the installer skips required steps like the specified fastener schedule or the correct finishing system. We follow CGI’s published installation requirements, use OEM parts where warranty coverage depends on it, and give you the photo record that documents it. That record is your backup if a warranty claim ever comes up.
A standard entry door is one working day from arrival to cleanup, and a double or French door set is usually two. Lead time for the door itself depends on the model and finish – standard fiberglass slabs run a couple of weeks, impact-rated and custom doors longer. Call (833) 847-4018 and we’ll give you a realistic date from the measured survey.
Often, yes. Hinge sag, weatherstrip compression, threshold seal issues, and lock alignment are usually repairs, not replacements. We tell you which one you’re looking at after the measured survey, with the price for both on the written quote so you decide.
Sometimes. Like-for-like door replacement often doesn’t require one, but a change in opening size or a new impact-rated configuration can. We check what applies to your address during the survey and list any permit and inspection cost on the written quote before work starts.
We come back and make it right. That’s the 365-Day Done Right Promise – written into the Haven Standard on every job, not offered as a courtesy. Call (833) 847-4018 and we’ll schedule the return visit.
Written by the team at Sightline Windows & Doors Boulder City, serving Boulder City and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Boulder City
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Boulder City Services
