New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Boulder City pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
Mr-Glass Sliding & Patio Doors in Boulder City: What to Know First
We install and repair Mr-Glass sliding and patio doors across Boulder City as an independent Mr-Glass service provider. Most repairs are a single visit; full patio door replacements typically take one to two days once the measured survey is done and the door is in hand. The price is written down before anyone picks up a tool: you get a line-item quote in dollars, not a “call for pricing” runaround, and the quote is the same document as the measurement.
This page is for Boulder City homeowners who already have Mr-Glass doors on their house and want them fixed right, or who want Mr-Glass specified for a replacement because it’s the line they trust. Our technicians have up to 14 years of experience, are background-checked and uniformed, and carry their license numbers before they knock. To price a job, call (833) 847-4018. A live person answers.
How Mr-Glass Products Fail – and How We Fix Them

Mr-Glass builds a solid patio door, but the failures we see in Boulder City are specific, and they aren’t the same failures you get on a PGT or a CGI. Here’s what actually goes wrong and what we do about it.
- Roller flat-spotting on vinyl rollers in the sliding panel. The standard rollers in Mr-Glass sliding panels are nylon-sleeved, and in a door that sees two moves a day for eight to ten years they develop flat spots. The panel sags, drops out of square, and starts scraping the bottom track. We replace with sealed stainless-steel ball-bearing rollers sized to the Mr-Glass shoe, set the panel height, and align the top guide so it tracks clean and stays put.
- Weatherstripping and sweep deterioration at the interlock. The fin-seal and the bottom sweep are the first pieces to go. Once the sweep loses its lip, Boulder City’s wind-driven dust works into the track and chews up the fin-seal faster. We swap the interlock fin-seal and the bottom sweep with OEM-profile replacements so the door closes to the same tolerance, then clean and re-lube the track with a dry silicone, not grease. Grease attracts grit. In a desert climate that’s a mistake you pay for twice.
- Fogged glass from a failed dual-pane seal. Any dual-pane Mr-Glass door with a compromised perimeter seal will pull moisture between the panes. It shows up as a milky film inside the insulated glass unit, usually starting at a corner. The frame is fine; the sealed glass unit isn’t. We measure the IGU, order the replacement to the right U-factor and SHGC for Boulder City’s summer solar load, and re-glaze the panel with fresh setting blocks. The frame and panel keep going.
- Impact-rated door seal failure after a hard knock. Mr-Glass impact lines are built for wind-borne debris, and they hold up well. But when a panel takes a hit, the perimeter gasket can deform and lose contact without breaking the glass. It looks fine but it’s no longer sealed. We inspect the gasket and the frame anchor points, replace the gasket to OEM spec, and verify the assembly still meets the impact rating it was sold with.
- Roller and track wear on older sliding panels that were never re-lubricated. The stainless roller assembly itself survives, but the track gets pitted from dust buildup and the panel starts to skip. We resurface or replace the track with an anodized extrusion, then set the rollers to the proper clearance so the panel glides without side-play. A door that shimmies in the frame is a door that’s wearing itself out.
Before
AfterOur Mr-Glass Sliding & Patio Doors Process
Every Mr-Glass job runs the same documented sequence, because the measured survey and the final invoice are the same document under the Haven Standard.
- 1
Diagnostic visit. We measure the opening, record the panel and glass dimensions, note the Mr-Glass model and series if it’s stamped, and photograph the failure. You keep the written record.
- 2
Parts decision, in writing. We call out whether the fix needs an OEM Mr-Glass part or a quality aftermarket equivalent, and we price both. OEM when the profile or the impact rating depends on it; aftermarket when the part is a standard size and the aftermarket unit is equal or better for less. Either way, the price is in dollars before we start.
- 3
The repair. Track, rollers, sweep, fin-seal, glass unit, gasket, or a full panel swap. We don’t open a wall we didn’t survey.
- 4
The test. Panel glide, latch engagement, sweep contact against the sill, and a check that the door closes and locks the way it did when it was new. On impact units we verify the rating is intact.
- 5
The photo record. Before and after shots of every component we touched, plus the written scope and the 365-Day Done Right Promise. If it’s not done right within a year, we make it right.
- 6
Cleanup and handoff. Old parts bagged and removed, track wiped clean, and your documentation laid out so you know exactly what was done and what it costs to maintain.
What Mr-Glass Sliding & Patio Doors Costs in Boulder City

These are real ranges for Mr-Glass sliding and patio door work in Boulder City. Every one of them is a written line-item quote before work starts, not a verbal estimate that changes once the truck is in the driveway.
| Scenario | Typical range |
|---|---|
| Roller replacement and re-alignment (sliding panel) | $180 – $340 |
| Weatherstripping, sweep, and fin-seal replacement | $140 – $290 |
| Fogged insulated glass unit (IGU) replacement, dual-pane | $320 – $620 |
| Impact-rated gasket replacement and seal verification | $260 – $480 |
| Track resurfacing or anodized track replacement | $280 – $540 |
| Full Mr-Glass sliding patio door replacement, standard | $1,600 – $3,400 |
| Full impact-rated patio door replacement | $3,200 – $6,800 |
What moves the price: panel size, whether the unit is impact-rated, whether the glass is dual-pane or triple, whether the track is salvageable, and whether an OEM part is required for the profile. A free second opinion on any written estimate is yours for the asking. Call (833) 847-4018 to schedule a measured survey; the quote you get is the price you pay.
Why Boulder City Homeowners Call Sightline Windows & Doors Boulder City for Mr-Glass Work
Because you can read the price before anyone touches your door. That’s Haven Clause 1: have it in writing. The measured survey you keep is the same document as the invoice, so there’s nothing to renegotiate halfway through. Every job is governed by the 365-Day Done Right Promise and leaves a documented photo record when it’s finished.
Our technicians have up to 14 years of experience and carry license numbers before they arrive. Under Haven Clause 3, the person at your door is the person on the record. We also work the other lines – PGT, CGI, CWS, and ES Windows – so if a Mr-Glass part isn’t the right answer, we’ll tell you and price the alternative side by side. Free second opinions on competitor quotes are standard, and a live person answers the phone at any hour.
FAQs

Mr-Glass doors typically carry a limited manufacturer warranty on the frame and the sealed glass unit, and a repair done to OEM spec with OEM parts generally keeps that warranty intact. We note on your written scope which parts are OEM and which are aftermarket so you know exactly where you stand. Call (833) 847-4018 and we’ll review your door’s documentation with you.
Yes to both, and we price them side by side. Rollers, sweeps, fin-seals, and gaskets are usually available OEM through Mr-Glass’s parts channel; for standard-size hardware we’ll also quote a quality aftermarket equivalent when it’s equal or better for less. If the profile or the impact rating depends on the OEM part, that’s the one we specify.
Repair it if the frame is sound and only the hardware or glass unit has failed – that covers most roller, sweep, track, and fogged-IGU jobs, and it’s dramatically cheaper than a full replacement. Replace it when the frame is out of square, the panel is cracked, or the door is more than 15 years old and showing multiple failures at once. The measured survey tells you which, in writing.
Most repair jobs are scheduled within a few business days of your survey, and a standard hardware repair is a single visit. A full replacement or a fogged-glass unit takes longer because the panel or IGU has to be ordered to the exact measurement. Call (833) 847-4018 for the written estimate and the lead time that fits your job.
No. The measured survey and the written line-item quote are free, and the quote cannot differ from the survey under Haven Clause 1. If you have a competitor’s quote for a Mr-Glass door, we’ll give you a free second opinion on it before you commit.
Written by the team at Sightline Windows & Doors Boulder City, serving Boulder City and nearby areas.
Ready to see a written price on your Mr-Glass sliding or patio door? Call (833) 847-4018 for a free estimate. A live person answers, and the quote you get is the price you pay.
Six Reasons Homeowners Choose Sightline Windows & Doors Boulder City
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Boulder City Services
