New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Boulder City pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
Mr-Glass Custom & Geometric Windows in Boulder City: What to Know First
We supply and install Mr-Glass custom and geometric windows in Boulder City as an independent Mr-Glass service provider, and most single-opening projects run two to four weeks from written quote to final inspection once the product is ordered. Arched, radius, angled, and oversized openings take longer because every unit is built to the measured opening, not pulled from stock. The price is written in dollars before anyone starts: we measure the opening, put the sightline dimensions and glazing spec on paper, and that document is the quote you keep. No “call for pricing” – Haven Clause 1 exists for exactly this reason.
This page is for Boulder City homeowners who already know they want a Mr-Glass unit in a shaped or oversized opening, or who own one and want it serviced by someone who works on them regularly. Call (833) 847-4018 and a live person picks up.
How Mr-Glass Products Fail – and How We Fix Them

Mr-Glass builds a solid unit, and most of what we get called out to in Boulder City is install or environment related, not a defective sash. The failure modes below are the ones we actually see on shaped and oversized Mr-Glass openings in this desert climate.
- Arched and radius units losing their seal at the curve. On Mr-Glass arched and half-round units, the tightest point of the curve is where the glazing seal fails first. Boulder City’s summer sun drives surface temperatures high, the sealant at the radius dries and cracks, and you get fogging between the panes. We cut out the failed sealant, reseat the glazing, and verify the unit is still holding its U-factor – we don’t just caulk over the gap.
- Trapezoid and angled windows drifting out of square. Geometric openings with angled heads show up in custom homes around Boulder City’s hillside lots, and over time a unit built to an opening that wasn’t perfectly plumb will bind at the operating edge. We read the frame for square, adjust the shims and anchor points, and reset the operating hardware so the sash travels clean.
- Oversized fixed units and frame stress. A large Mr-Glass fixed unit in a two-story wall carries real dead load on the frame. If the rough opening header isn’t stiff enough, the frame racks slightly and the glass sits under stress. We check the header and framing before we ever set a replacement, because a new unit in a bad opening fails the same way.
- Solar-driven expansion at the perimeter. In Boulder City, exterior caulk joints move with the temperature swing from a summer afternoon to a cool desert night. A joint that was sealed in one season can pull open in another. This is the leak we find most on custom openings, and the fix is a joint designed for that movement, not a bead of standard caulk.
- Hardware wear on venting geometric units. Awning and casement units in custom shapes wear the operator and hinge points faster than standard rectangles because the geometry loads them unevenly. We replace worn operators and hinges with quality aftermarket parts matched to the unit, and where the opening needs an OEM part to stay warranty-safe, we tell you that before ordering.
One detail you won’t find on the manufacturer’s own site: Mr-Glass geometric units are built to order, so the serial and build spec live on a label set inside the jamb, and we photograph it on every visit. That photo record is how we match a replacement sash or part to your exact original build without guesswork.
Before
AfterOur Mr-Glass Custom & Geometric Windows Process
Every Mr-Glass custom or geometric job follows the Haven Standard – Have it in writing, Arrive on schedule, Verified crews, Evidence on every job, No surprises. Here’s what that looks like end to end.
- 1
Measured survey. We come out, read the opening for width, height, and square, note the sightline and the glazing, and photograph the existing unit. You keep a copy of the survey.
- 2
Written quote before any work. The survey becomes the written price – line-item, in dollars, with the product spec named. It cannot differ from the survey document.
- 3
Parts decision, in writing. For repairs, we tell you whether the fix is OEM or quality aftermarket and what that means for warranty. You decide with the numbers in front of you.
- 4
The install or repair. Background-checked, uniformed technicians arrive on schedule, identified by license number before they start. Shaped and oversized units are set, shimmed, and sealed to the measured spec.
- 5
The test. We operate venting units through their full range and water-check the perimeter and the glazing seal. If something’s off, we fix it before we hand it back.
- 6
Photo record and warranty. You get the documented photo record of the finished work and the 365-Day Done Right Promise – if it’s not done right, we make it right, stamped on the job under the Haven Standard.
What Mr-Glass Custom & Geometric Windows Costs in Boulder City

These are the ranges we write on Boulder City quotes for Mr-Glass custom and geometric work. Every price is written before work starts – these are the numbers you’ll see on paper after the measured survey.
| Scenario | Typical range |
|---|---|
| Repair – reseal glazing at arched or radius unit | $220 – $480 |
| Repair – reset out-of-square geometric unit, adjust hardware | $300 – $650 |
| Replace venting hardware on a shaped unit (quality aftermarket) | $180 – $420 |
| New Mr-Glass custom geometric unit – fixed, single opening | $1,200 – $2,800 |
| New Mr-Glass oversized or arched unit – impact-rated glazing | $2,400 – $5,500 |
What moves the price: the size and shape of the opening, whether the unit is fixed or venting, impact-rated versus standard glazing, and whether the framing needs work before we set the unit. Call (833) 847-4018 to schedule your free estimate – and if you have a competitor’s written quote, bring it. We review it as a free second opinion before you commit.
Why Boulder City Homeowners Call Sightline Windows & Doors Boulder City for Mr-Glass Work
Our technicians have up to 14 years of experience, and the Mr-Glass shaped and oversized units that come up in Boulder City are the kind of work that experience is for. We’re an independent Mr-Glass service provider, which means we fix what’s there rather than push you toward a new install. We also carry seven other verified manufacturer lines – PGT, CGI, CWS, ES Windows among them – so if a shaped opening calls for a different product to hit the performance or price you need, we’ll say so in the written quote.
Crews are background-checked, uniformed, and identified by license number under Haven Clause 3. Calls are answered by a live person around the clock, and every visit ends with a documented photo record and the 365-Day Done Right Promise. That’s the whole of it: the price is in writing, the evidence exists, and we stand behind the work for a full year.
FAQs

Yes, as long as the work is done to spec and we use OEM parts where the warranty requires them. As an independent Mr-Glass service provider we’re not authorized by the manufacturer, but we’re careful about warranty-safe practices and we’ll tell you in writing when a repair needs an OEM part to keep your coverage intact.
In most cases, yes. Mr-Glass builds geometric units to order, and we identify the exact build from the label inside the jamb and match the part – replaced with OEM where warranty dictates, quality aftermarket otherwise. Call (833) 847-4018 if you want to know whether a specific part is available before booking.
Repair is usually the right call if the frame and glass are sound and the problem is a seal, a hardware wear point, or an out-of-square unit – most repairs run $180 to $650. Replacement makes sense when the glazing itself is compromised, the framing is failing, or a new performance spec makes more sense. Our measured survey gives you both numbers so you can decide.
Repairs land between $180 and $650; new custom and oversized units run $1,200 to $5,500 depending on size, shape, and glazing. The written quote after our survey is the exact price, and it can’t change once work starts. Call (833) 847-4018 for a free estimate.
Most repair work is done in a single visit. A new custom or geometric unit takes two to four weeks from written quote to finish, longer for an arched or oversized opening because the unit is built to order. We put the schedule on the written quote so you know what to expect before you commit.
Written by the team at Sightline Windows & Doors Boulder City, serving Boulder City and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Boulder City
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Boulder City Services
