New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Boulder City pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
CGI Custom & Geometric Windows in Boulder City: What to Know First
Custom and geometric windows from CGI are built to match an opening, not the other way around, so replacement or repair in Boulder City usually runs $1,900 to $6,800 per opening depending on shape complexity and whether the unit is impact-rated. Most custom and geometric jobs are measured, quoted in writing, and installed within four to eight weeks, and as an independent CGI service provider we quote the full scope before any work starts. If you own a CGI arched, trapezoid, or oversized unit and want the number in writing first, call Sightline Windows & Doors Boulder City at (833) 847-4018.
This page is for Boulder City homeowners who already have CGI product in the wall and need it replaced, repaired, or matched. We’re not affiliated with CGI and don’t speak for them. We install and service their windows, and we’ll tell you plainly what a Boulder City installation demands.
How CGI Products Fail – and How We Fix Them

CGI’s custom and geometric lines show up in Boulder City in a few predictable ways. The desert climate pushes on them differently than coastal or mountain installations, so the failure modes we see here are specific. Here’s what we’ve found and what we do about it.
- Arched units out of square after ten to fifteen years. CGI’s arched and radius windows carry a curved head and sill that rely on a tight perimeter seal. In Boulder City’s summer heat, the frame expands and contracts more than the same unit would near the coast, and if the original install left the flashing short, the curve can shift. We re-check the radius with a trammel to the original arc and shim the frame back to true before sealing. If the sash itself has warped, that’s a replacement, not a repair, and you’ll see the measurement on paper before we make that call.
- Seal failure on geometric glazing. CGI’s fixed geometric panes (trapezoids, pentagons, custom polygons) use a sealed insulated glass unit with a spacer that can fog at the edge after years of thermal cycling. In Boulder City we see this most on south-facing angles where the sun hits hard from April through September. A fogged unit reads as a hazy streak inside the glass, not a scratch. We spec a replacement IGU matched to the original thickness and low-E coating, so the window’s U-factor stays where it was.
- Oversized sliders off track or out of level. CGI’s large custom openings on patio and multi-panel sliders are heavy. On a Boulder City home built in the 2000s on a slab that’s had years of heat, the floor plate can rise slightly and the rollers take a beating. We pull the panels, measure the track run with a level, and either re-set the rollers (most of the time) or re-machine the track. If the rollers are original, we swap to a sealed-bearing aftermarket roller with the same load rating.
- Corner seals and gaskets drying out. The gasket that seals the perimeter of any CGI custom unit degrades in UV. After eight to ten years in Boulder City sun the gasket loses its rebound, and you get a draft or a whistle on windy days. This is a $120 to $280 service call, not a replacement. We carry the profile sizes, so most jobs finish in one visit.
- Impact-rated CGI units with delamination at the interlayer. CGI impact glazing uses a laminated inner layer behind the glass. In high-heat exposure, if the edge seal was compromised, that layer can bubble or show a milky edge. You can’t repair that in the field. The whole IGU has to come out. We match the original impact rating and log the serials on the replacement so the coverage carries forward.
Before
AfterOur CGI Custom & Geometric Windows Process
Every CGI job follows the same six steps. The point of them is that nothing changes without a written record.
- 1
Measured survey. We measure the opening to the sixteenth of an inch, shoot the radius on curved units, and photograph the existing frame. You get a copy of the survey to keep. Per Haven Clause 1 (Have it in writing), the survey and the quote are the same document.
- 2
Diagnostics on the existing unit. We open the sash or pull the panel, check the gasket, and read the U-factor sticker on the glass. That tells us whether you need a repair or a replacement, and which.
- 3
Parts decision. OEM parts carry the exact spec; quality aftermarket parts (sealed-bearing rollers, matched IGUs) cost less and hold up at least as well. We write both options and the price on each into the quote. You pick. The price doesn’t move afterward.
- 4
The install or repair. The technician who turns up is background-checked, uniformed, and carrying their license number on the paperwork. Per Haven Clause 3 (Verified Crews), the person at your door is the person on the record.
- 5
The test. We cycle the window, check the lock, and run a water test on any exterior frame we’ve opened or replaced. If it leaks now, we fix it now, not next week.
- 6
Photo record and warranty. Before we leave, we photograph the finished work and hand you the record. Every job is covered by the 365-Day Done Right Promise. If it’s not done right, we make it right. That’s Haven Clause 4 (Evidence on every job) and 5 (No surprises).
What CGI Custom & Geometric Windows Costs in Boulder City

These are the ranges we quote most often on CGI custom and geometric work in Boulder City. Every quote we write is free and in writing; the survey you keep is the basis for it.
| Job | Typical Range |
|---|---|
| Gasket and seal replacement (perimeter of one custom unit) | $120 – $280 |
| Roller or track repair on a CGI slider | $240 – $560 |
| Replacement IGU on a geometric fixed pane (non-impact) | $480 – $1,200 |
| Replacement IGU on an impact-rated CGI unit | $900 – $2,400 |
| Full replacement, arched or custom geometric, per opening | $1,900 – $6,800 |
| Oversized opening or multi-panel slider replacement | $4,200 – $11,500 |
What moves the price: the shape of the opening (a plain rectangle sits at the bottom of the range, an arch or trapezoid at the top), impact versus non-impact glazing, whether the original rough opening has to be re-framed, and whether the unit needs to match an existing color. Bring us a competitor’s written estimate and we’ll review it at no charge, side by side with ours.
Why Boulder City Homeowners Call Sightline Windows & Doors Boulder City for CGI Work
We’ve handled 18,000+ openings since 2012, and every one started with a written price and ended with a documented photo record. That’s the Haven Standard, and it’s not a marketing line. It’s the operating procedure.
Our technicians have up to 14 years of experience with CGI product, and we know the series that show up in Boulder City homes: the arched and radius units, the large fixed geometric panes, the multi-panel sliders. When a CGI job needs a part we can’t source in time, we have eight manufacturer lines behind us – PGT, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux among them – so every option stays on the table. Calls are answered by a live person, 24/7, and every completed job is stamped with the 365-Day Done Right Promise. That means if something isn’t right within a year, we come back and make it right, not as a favor but as the written standard.
FAQs

Not if the replacement is done to spec. CGI’s warranty on homeowner-issues is generally protected when the replacement IGU or part matches the original thickness, low-E coating, and impact rating, so we log the original spec on the survey and match it. If we can’t source the exact OEM part, we tell you that in writing before we order. Call (833) 847-4018 for a free review of your current warranty paperwork.
Most arched CGI windows can be repaired if the frame is sound, and replaced only when the sash has warped or the radius has shifted beyond what a re-shim can correct. We make that call on the measured survey, not on sight. The survey is in writing and you keep it.
We carry the common gasket profiles and roller sizes for CGI custom units, so most repairs finish same visit. Larger IGUs and full replacement units are fabricated to your measured spec, which typically takes three to six weeks. You’ll see the lead time and the price on the written quote before we order.
Small repairs we can usually schedule within a week of the survey; full replacements depend on fabrication lead time, which we quote you up front. We don’t quote same-day installs on a custom opening because the unit isn’t built yet, and we won’t pretend otherwise.
No. The written price is the price. Per Haven Clause 1, the measured survey and the invoice are the same document. If we discover a problem we didn’t see on the survey, we stop and put the change in writing before any work continues.
Call Sightline Windows & Doors Boulder City at (833) 847-4018 for a free estimate on your CGI custom and geometric windows. We’ll measure, we’ll quote in writing, and you’ll keep the survey. That’s the whole point of the Haven Standard.
Written by the team at Sightline Windows & Doors Boulder City, serving Boulder City and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Boulder City
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Boulder City Services
