New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Boulder City pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
Why Boulder City Homeowners Choose CGI Windows & Doors
We service and install CGI windows and doors in Boulder City as an independent provider, which means we can diagnose the CGI vinyl units actually on your home and fix what’s failing instead of selling you a factory line. Our work here focuses on how CGI’s Sentry single-hung and double-hung windows, horizontal rollers, 3-lite sliders, casement and awning windows, and vinyl patio doors age in a high-desert climate with punishing sun and wind-driven grit. We’re not affiliated with or authorized by CGI – we’re just very familiar with their products. Call (833) 847-4018 to schedule a free estimate.
That independence matters in Boulder City. A manufacturer’s rep is there to move product. We’re there to tell you whether your CGI sash can be re-glazed or whether the frame has gone brittle past the point of sensible repair. The answer isn’t always a sale, and we say so when it isn’t.
Why Trust Sightline Windows & Doors Boulder City for Your CGI Windows & Doors?

Our technicians have up to 14 years of experience and have worked on enough CGI vinyl to know its failure patterns by symptom, not guesswork. A CGI Sentry double-hung that won’t stay up is usually a balance, not a sash. A 3-lite roller that binds is usually a flattened wheel on an oxidized track, not a broken frame. That diagnostic familiarity is what keeps a small fix small.
We source OEM-compatible CGI parts where the profile is still in production – replacement sash, balances, rollers, pivot and sash-lock hardware – and turn to quality aftermarket glazing, weatherstrip, and rollers only when a piece has been discontinued. Every service is documented on the same measured survey you keep, and the written price is settled before anyone starts. Under the Haven Standard, our Verified Crews clause means the technician at your door is background-checked, uniformed, and identified by license number before arrival. The 365-Day Done Right Promise rides on every CGI job we complete: if it isn’t done right, we make it right. Nothing about a CGI repair should feel like a gamble, and in Boulder City it shouldn’t.
Before
AfterCommon CGI Windows & Doors Problems We Fix in Boulder City
Boulder City’s climate writes its own wear pattern on CGI products. Here’s what we see most, and why.
- Solar-degraded vinyl and failed glazing seals on CGI Sentry sash units. The Mojave sun at roughly 2,500 feet breaks down vinyl over years, and the sealed unit’s spacer and seal give out sooner than in milder zones. The result is fogging between the panes and weatherstripping that turns brittle and crumbles. Once the seal is gone, no amount of cleaning restores the clarity – the unit has to be re-glazed or replaced.
- Roller and track wear on CGI horizontal rollers and 3-lite sliding windows. Wind-driven dust off the Eldorado Valley grinds into tracks, and flattened rollers on an oxidized track make the sash drag and rack. A window that once glided now needs a shoulder to move. Fresh rollers, a cleaned track, and new weatherstrip usually bring it back.
- Failed balance systems and pivot/sash-lock hardware on CGI single- and double-hung windows. Springs and balances fatigue, and the sash starts dropping or refusing to stay put. Pivot pins and sash locks wear until the window won’t latch tight against the grit. These are replaceable parts, and replacing them is far cheaper than a new window.
- Door slab and frame issues on CGI vinyl entry and French patio doors. Misaligned hinges let a slab sag until it drags the threshold; worn sweep gaskets let in dust and heat. Left alone, a sagging slab stresses the frame and the lock. Realignment and new sweeps handle the common cases; a bowed frame is a different conversation.
- UV-cracked interior seals and sun-screen wear on west-facing CGI units. West and southwest exposures take the hardest hit. Seals crack, screens stretch or tear, and the frame edges show chalky oxidation. Boulder City homes up the hill from the historic core, in the 1970s-2000s stucco subdivisions, see this constantly because their sliders and early vinyl face full afternoon sun.
One pattern worth describing plainly. A CGI horizontal roller or 3-lite sliding window that once glided easily often starts binding, with the sash dragging on a worn bottom track and the rollers flattened from years of desert grit. The usual cause is roller wear plus an oxidized track plus a glazing seal that has fogged, so a qualified local pro typically cleans and evaluates the track, replaces rollers and weatherstrip, and either reseals or replaces the insulated unit when the seal is gone. In more severe cases where the vinyl frame is brittle or bowed, the honest call shifts toward a full-frame replacement rather than chasing a repair.
CGI Parts & Our Repair-vs-Replace Approach

We don’t keep CGI parts on a shelf for you. Each job’s parts are specified from the measured survey and the actual profile on your window, then sourced to match. Where CGI’s OEM sash, balances, rollers, and hardware are still available for your series, we use them – the fit is right and the warranty stays clean. Where a piece has been discontinued, a quality aftermarket glazing unit, weatherstrip, or roller is a fair substitute, and we say which is which in writing before we order.
Repair versus replace comes down to the frame and the sealed unit. If the vinyl profile is sound and the hardware is the problem, repair is honest and usually the right call. If the frame is brittle, bowed, or the sealed unit has failed structurally, repeated patch repairs cost more over a few years than a clean replacement – and we’ll tell you so. The written price for either path is yours before work starts, and a free second opinion on any competitor’s estimate costs you nothing. Call (833) 847-4018 to talk through your CGI window.
Our CGI Service Process – Step by Step
- 1
Diagnosis. We measure the opening and the sash, check the glazing for seal failure, test the balances or rollers, and read the frame for brittleness or bow. You get the findings in writing, in plain terms.
- 2
Repair or install. Small fixes – rollers, balances, locks, sweeps, weatherstrip – get done on the spot where parts allow. Re-glazing and full-frame replacement are scheduled against the written scope you’ve already seen and priced. In the Historic District, we factor the city’s design review into the plan from the start.
- 3
Test. Every CGI unit is operated through its full range: sash travel, latch engagement, seal contact, drainage. A sliding window that doesn’t glide or a door that won’t latch is not finished.
- 4
Warranty and record. The 365-Day Done Right Promise is stamped on the job, and you get the documented photo record from every visit. The install and the invoice match the survey – no surprises clause, in writing.
CGI Products We Service & Install in Boulder City

We handle CGI’s vinyl window and door designs across the categories Boulder City owners actually have. That includes the Sentry Series single-hung and double-hung windows, horizontal roller and 3-lite sliding windows, vinyl casement and awning windows, and vinyl entry and French patio doors. Alongside standard vinyl service, we install double-hung impact windows, horizontal roller and sliding impact windows, and full-frame replacements where a rebuild is the right answer. Impact-rated glazing earns its keep here – the Eldorado Valley wind events make impact resistance a real consideration, not a sales tag. We specify each opening by what it requires, and we list the price in dollars on the page before anything is ordered.
We Also Service These Brands
Sightline Windows & Doors Boulder City isn’t a single-brand shop. We also service and install PGT, CWS, ES Windows, and ECO Window Systems, so a home with mixed product lines – common in Boulder City’s newer subdivisions – gets one survey and one written scope instead of a runaround between installers. One crew, one record, eight verified manufacturer lines specified by performance tier.
FAQs – CGI Windows & Doors Service in Boulder City

No. We’re an independent CGI service provider, not an authorized dealer or factory representative. That means we diagnose and repair the CGI products you own without re-selling you a factory line, and we’re upfront that we can’t claim manufacturer authorization. Call (833) 847-4018 for an independent assessment.
We use genuine OEM CGI parts where the profile is still in production – replacement sash, balances, rollers, and hardware – and quality aftermarket glazing, weatherstrip, and rollers where a piece has been discontinued. The written scope names which you’re getting before we order, so there’s no ambiguity.
Most hardware fixes – rollers, balances, locks, sweeps – finish in a single visit once parts are matched to your series. Re-glazing or a full-frame replacement depends on the unit and the lead time for your specific CGI profile, and we schedule against the written scope so you know the timeline before work begins. Call (833) 847-4018 to get an exact read on your window.
We cover CGI’s vinyl window and door designs, including the Sentry Series single-hung and double-hung windows, horizontal roller and 3-lite sliding windows, vinyl casement and awning windows, and vinyl entry and French patio doors. If you’re unsure which series you have, the measured survey identifies the profile.
Warranty-safe practice means using the correct OEM-compatible parts for your profile and documenting the work – which is exactly what we do. We can’t speak for CGI’s policy on someone else’s repair, but our service is performed to preserve your coverage wherever the parts allow, and the written scope and photo record back it up. Call (833) 847-4018 with questions about your specific unit.
CGI service in Boulder City typically runs from about $150-$350 for hardware and weatherstrip fixes like rollers, balances, or sweeps, $300-$700 per unit for re-glazing a failed sealed unit, and $650-$1,400 per opening for full-frame replacement of a standard CGI vinyl unit – with impact-rated and custom sizes landing higher. These are ranges, not a quote: your written price comes from the measured survey and can’t differ from it. Call (833) 847-4018 for an exact figure – estimates are free.
Book Your CGI Service in Boulder City, NV
Whether your CGI slider is dragging, your double-hung sash has fogged between the panes, or a patio door has stopped latching clean, we’ll measure it, tell you what’s repairable, and hand you the price in writing before any work starts. No authorization claims we can’t make – just documented, warranty-safe CGI service in Boulder City. Call (833) 847-4018 to schedule your free estimate.
Written by the team at Sightline Windows & Doors Boulder City.
Six Reasons Homeowners Choose Sightline Windows & Doors Boulder City

Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Boulder City Services
What Neighbors Say About Sightline Windows & Doors Boulder City
