New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Boulder City pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
ES Windows Custom & Geometric Windows in Boulder City: What to Know First
If you own ES Windows products and need custom or geometric windows, we install and replace them in Boulder City as an independent ES Windows service provider. A typical custom or geometric opening takes two to five weeks from measured survey to final inspection, because arched, curved, and oversized units are built to the opening rather than pulled from a rack. We put the price in writing before any work starts, and that written quote cannot differ from the measured survey you keep.
This page is for owners of ES Windows units in Boulder City who need a shape that isn’t a rectangle: true arches over entries, radius and eyebrow windows, trapezoids under a gable, circles and half-rounds, and oversized openings that carry more glass than a standard frame is built for. It covers which ES Windows product lines show up locally, how they fail in this climate, what the work costs in dollars, and how we document the job. Call (833) 847-4018 and a live person answers, day or night.
How ES Windows Products Fail – and How We Fix Them

Custom and geometric glass fails differently than a standard double-hung. The shape itself concentrates stress at the corners, the curve stresses the frame, and Boulder City’s desert swing, dry heat, and occasional hard wind put load on units that most mass-market windows never face. Here are the failure modes we see on ES Windows jobs, and what we do about each.
- Seal failure at curved and angled corners on ES Windows arched and radius units. A true arch or eyebrow concentrates movement at the tight radius where the glazing meets the frame. Over years of desert thermal cycling – hot days, cool nights – that seam can let go before the flat edges do. The symptom is a faint fog or a thin film between the panes on the curved section only. Our fix is a full reglaze with a new sealed unit built to the ES Windows frame profile, not a patch over the old seal.
- Frame distortion on oversized openings. Large rectangular and geometric openings in ES Windows lines can develop a slight bow in the sash or frame when the rough opening wasn’t shimmed to carry the weight. You’ll notice it as a drag at one corner or a gap that opens and closes with the season. We check plumb and level across the full opening, re-shim, and reset the frame before any new glass goes in.
- Failed weatherstripping and gaskets on shaped units. Geometric windows often use a continuous gasket around the curve, and that gasket dries and shrinks in low humidity. The sign is a whistle or a draft at the top of the arch on windy days. We replace the gasket to the ES Windows profile rather than forcing a straight-run strip into a curve.
- Hardware and operator wear on operable custom units. Awning and casement versions of custom ES Windows units carry hinges and operators that take more load because of the glass weight. A crank that binds or a hinge that sags is usually a worn mechanism, not a glass problem. We spec the correct replacement operator or hinge for that series.
- Condensation and thermal failure on single-glazed geometric glass. Some older geometric units are single-pane, and in Boulder City’s summer heat that glass radiates inward. We read the U-factor and SHGC (how much heat the glass lets through) and offer a modern glazing package that cuts the solar gain without changing the shape or the look.
Two details you won’t find on ES Windows’s own site: the curved-corner seal on radius units is usually the first thing to fail, not the glass itself, and the gasket around a true arch has to be ordered to the curve – a straight gasket forced into a radius will fail again within a season. Both are jobs we handle on ES Windows product regularly in Boulder City, and we’ll tell you plainly whether a repair or a replacement makes sense.
Before
AfterOur ES Windows Custom & Geometric Windows Process
- 1
Measured survey and diagnostics. We measure the opening, record the frame profile, note the ES Windows series, and photograph every elevation. You keep a copy of the survey. That document is the basis for the quote – they’re the same document, which is the founding principle of how we work.
- 2
Parts decision, written down. We tell you whether the job calls for OEM ES Windows parts or a quality aftermarket match, and why. We don’t push OEM for its own sake or aftermarket to save a dollar – we name the trade-off and let you decide with the number in front of you.
- 3
Custom fabrication to the opening. Arched, curved, and geometric units are built to the confirmed dimensions, with glazing specified by U-factor and SHGC for Boulder City’s climate rather than a default spec.
- 4
Installation by background-checked, uniformed technicians. Every technician is identified by license number before arrival – the person at your door is the person on the record. We set the frame plumb and shimmed to carry the glass, then set the unit.
- 5
Test and document. We operate every operable unit, check the seal and gasket on the curve, and take a documented photo record of the finished job. That photo record is included as standard evidence, not an upsell.
- 6
The 365-Day Done Right Promise. Every completed job is covered for a full year under the Haven Standard: if it’s not done right, we make it right. It’s written down, not a verbal assurance.
What ES Windows Custom & Geometric Windows Costs in Boulder City

Every price below is written before any work starts. Custom shapes cost more than standard rectangles because the unit is built to the opening, and a true arch or radius is the most labor-intensive piece of glass you can put in a wall. These are the ranges we work in for ES Windows product.
| Job | Typical range |
|---|---|
| Custom rectangular ES Windows unit (per opening) | $1,200 – $2,400 |
| Arched or eyebrow ES Windows unit (per opening) | $1,800 – $3,600 |
| Curved / radius or oversized geometric unit | $2,600 – $5,500+ |
| Reglaze a failed sealed unit (labor + glass) | $350 – $850 |
| New weatherstripping / gasket to a curve | $180 – $420 |
| Operator or hinge replacement on an operable unit | $220 – $500 |
What moves the price: the shape and size of the opening, whether the glass is single or modern double-glazed, whether the frame needs resetting, and whether the unit is operable. A repair is often far cheaper than a replacement – we’ll tell you which one your unit actually needs. Call (833) 847-4018 and we’ll schedule your free estimate; the written quote won’t differ from the survey you keep.
Why Boulder City Homeowners Call Sightline Windows & Doors Boulder City for ES Windows Work
We’re an independent ES Windows service provider, and we work on ES Windows product alongside PGT, CGI, CWS, and ECO Window Systems, so we can tell you honestly when a different line fits an opening better than the one you have. We’re independently owned and operated under the Haven Standard, which has governed every installation we’ve completed since our founding in 2012 – 18,000+ windows and doors, each with a written price before work started and a documented photo record when it finished. Our technicians have up to 14 years of experience. A live person answers the phone 24/7, not a voicemail queue. And bring us a competitor’s written estimate – we’ll review it free as a second opinion. Call (833) 847-4018 for your free estimate.
FAQs

Using OEM ES Windows parts keeps the structural warranty intact; a quality aftermarket part may affect a portion of it. We tell you which parts we’re using and how they affect your warranty before we order, and we work in warranty-safe practice wherever it’s possible.
Yes. Curved and radius glass, curve-fitted gaskets, and shaped sealed units are ordered to the confirmed measurements of your opening. Custom shapes take longer to fabricate than standard sizes, which is why we quote the timeline in writing up front. Call (833) 847-4018 for a free estimate.
Repair first if the frame is sound and the problem is a failed seal, gasket, or operator. Replace when the frame is distorted or the glazing is single-pane and overheating the room. We measure the unit and give you both numbers so you can decide with the dollar figures in front of you.
Most jobs run two to five weeks from survey to final inspection, because the shaped unit is built to the opening. Repairs and reglazing are quicker. We give you the schedule in writing with your quote and arrive on schedule per the Haven Standard. Call (833) 847-4018 to start.
No. We’re an independent ES Windows service provider and are not affiliated with or authorized by ES Windows. We work on the product and we’re upfront about that relationship.
Written by the team at Sightline Windows & Doors Boulder City, serving Boulder City and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Boulder City
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Boulder City Services
