New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Boulder City pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
Therma-Tru Door Installation in Boulder City: What to Know First
We install Therma-Tru doors in Boulder City as an independent Therma-Tru service provider, and most entry door replacements take one to two days from tear-out to final adjustment. Your written price is settled before we touch the frame, so the number you approve is the number on the final invoice. If you already have a Therma-Tru quote from another installer, we’ll review it at no charge.
This page is for Boulder City homeowners who own a Therma-Tru door or are specifying one, and who want to know what actually fails on these doors in our climate, which series hold up, and what the work runs in dollars. Call (833) 847-4018 and a live person answers, any hour.
How Therma-Tru Products Fail – and How We Fix Them

Therma-Tru builds a good door. The problems we see in Boulder City almost always come from installation, sun exposure, and hardware wear rather than from the slab itself. Here’s what shows up on our surveys.
- Fiberglass Classic-Craft and Smooth-Star slabs with sun-chalked skins. Boulder City sits at roughly 2,500 feet with intense high-desert UV and low humidity, and a west-facing entry can take eight hours of direct sun. The painted skin on a fiberglass slab chalks and fades faster here than in coastal markets, and on some older slabs the skin can lift slightly at the edges. We prep and refinish to the manufacturer’s spec, then confirm the door still latches square after the new finish cures.
- Warped or swollen door slabs on steel and fiberglass entries. A door that sticks at the top corner in July usually has a hinge-side jamb that wasn’t shimmed plumb at install, not a bad slab. We read the frame with a level and a sightline check before we ever quote a replacement, because re-hanging a plumb door on a corrected frame often solves a problem that looks like a slab failure.
- Failed weatherstripping and sweeps on Therma-Tru entry systems. The kerf-mounted bulb seal and adjustable sill on most Therma-Tru entries wears out years before the door does, and once the seal compresses you get dust intrusion and heat gain at the threshold. We replace the seal and re-set the sill to the door’s actual clearance rather than installing a thicker seal that binds the slab.
- Loose or stripped hinge screws on heavy French and double doors. The active leaf on a Therma-Tru French door carries real weight, and screws pull out of the jamb over time. We fill and re-drill the hinge pockets, then reset the door to the factory reveal so both leaves close against each other evenly. A door that rubs at the astragal usually needs this, not a new unit.
- Failed multi-point locks and deadbolts. When the lock feels stiff, the cause is usually a strike plate that’s a sixteenth off after seasonal movement, not a broken lock body. We diagnose the alignment first and only replace hardware when the mechanism has actually failed.
The pattern in Boulder City: door failures here track sun and dry air, not rain. A door that would last twenty years in a wet climate can lose its finish in half that on an exposed south or west wall, which is why we spec and service Therma-Tru products with that exposure in mind.
Before
AfterOur Therma-Tru Door Installation Process
- 1
Measured survey you keep. We measure the rough opening, check the frame for plumb and square, and record the readings on a document that stays with you. That document and the written quote are the same document.
- 2
Written price before any work. The quote names the door line, the hardware, the seal, and any frame repair, in dollars. No line is added later without your sign-off.
- 3
Parts decision, stated plainly. We tell you when an OEM Therma-Tru part is the right call (hinges, sill, weatherstrip on a unit still under warranty) and when a quality aftermarket equivalent is the honest choice (a deadbolt, a sweep on an older door). You hear the trade-off before we order.
- 4
Installation. The old unit comes out, the opening is squared and flashed, the new door is set, shimmed, and secured, and hardware is fitted to the door’s real reveal.
- 5
Test and adjust. We open and close the door through its full swing, check the latch and lock alignment, confirm the seal makes contact, and photograph the finished opening.
- 6
Photo record and warranty. You receive the documented photo record and the written warranty, and the job is covered by the 365-Day Done Right Promise.
What Therma-Tru Door Installation Costs in Boulder City

These are the ranges we write on Boulder City quotes. Your exact number depends on the door line, the opening, and what the survey finds.
| Single Therma-Tru entry door, standard size | $1,800 – $3,600 installed |
| Entry door with sidelites or a transom | $3,200 – $6,500 installed |
| Therma-Tru French or double door | $3,800 – $8,000 installed |
| Storm or exterior secondary door | $1,200 – $2,600 installed |
| Frame repair, re-hang, or hardware correction | $250 – $900 |
| Weatherstrip and sill re-set | $150 – $400 |
What moves the price: door line and material, whether sidelites are involved, glass upgrades, and whether the existing frame is sound or needs repair. A frame that’s out of plumb can add labor, and we tell you that at the survey, not mid-job. Call (833) 847-4018 to schedule your free estimate, and bring any competitor quote for a free second opinion.
Why Boulder City Homeowners Call Sightline Windows & Doors Boulder City for Therma-Tru Work
Haven Clause 1 is the whole point: the price is written before anyone starts, and it can’t differ from the measured survey. Our technicians have up to 14 years of experience, they’re background-checked and uniformed, and their license numbers are on the page before arrival under Haven Clause 3, Verified Crews. Every visit leaves a documented photo record.
Therma-Tru is one of eight manufacturer lines we install, alongside PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, and ViewLux. That matters when we survey your door: we recommend Therma-Tru when it’s the right spec, and we’ll tell you when another line fits the opening and the exposure better. The work is backed by the 365-Day Done Right Promise.
FAQs

No, as long as the installation follows the manufacturer’s spec and OEM parts are used where the warranty requires them. We install to that standard and tell you up front where an aftermarket part is safe and where it isn’t. Call (833) 847-4018 with your model number and we’ll clarify the warranty position before you commit.
Yes. We source OEM Therma-Tru hardware, weatherstrip, and sills for doors in good structural condition, and we’ll tell you honestly when an aftermarket equivalent performs the same job for less. Call us with your model and we’ll check availability.
Repair if the slab is sound and the problem is alignment, seal, or hardware. Replace if the skin is failing, the frame is rotted, or the unit no longer seals against Boulder City’s heat and dust. Our measured survey makes that call in writing rather than in a sales pitch. Call (833) 847-4018 for the estimate.
Most single entry doors take one to two days from tear-out to final adjustment, and French or double doors can run two to three. Lead time on the door itself depends on the line and finish; we tell you the expected date on the written quote. Call (833) 847-4018 to schedule your survey.
Yes. We install Therma-Tru impact-rated entry and storm doors where the spec calls for them, and we confirm the rating against the opening and the glass package. Call (833) 847-4018 to discuss what your wall requires.
Ready for a written price? Call (833) 847-4018 for a free estimate on your Therma-Tru door installation in Boulder City. A live person answers, your price is written before any work starts, and the job is covered by the 365-Day Done Right Promise.
Written by the team at Sightline Windows & Doors Boulder City, serving Boulder City and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Boulder City
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Boulder City Services
