Last updated November 17, 2026
New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Boulder City pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
How Long Does Window Installation Take? Timelines and What to Expect
The standard answer you’ll find on most contractor sites, “one to two hours per window,” describes only the install hour itself. It skips the permit wait, the factory lead time on a special-order size, and the half-day that vanishes when a rough opening turns up a rotted sill plate nobody measured for. For a Boulder City homeowner planning around work and family, that single number is close to useless. This guide breaks the real schedule into its parts: survey day, permit pull, product lead time, install day, and inspection, with day counts specific to Clark County and the mid-century ranch homes common in Boulder City.
Quick Answer

A straightforward window replacement in Boulder City usually takes one to two weeks from signed quote to finished install: about a day for the measured survey, three to seven business days for permit review, and a one- to two-day install for a typical whole-house project. Add four to six weeks when your sizes are special-order, and add a half-day to a day if the install crew opens a wall and finds hidden rot or a non-standard rough opening.
Before
AfterTable of Contents
- The Real Timeline, Broken Into Stages
- How Wall Construction Changes Install Time
- What “Special Order” Means in Boulder City
- Single-Day vs. Phased Installs: Which Fits Your Household
- How a Documented Survey Prevents Timeline Surprises
- Hidden Conditions That Add a Day
- The Inspection Stage
- Common Mistakes to Avoid
- When to Call a Professional
- Frequently Asked Questions
The Real Timeline, Broken Into Stages

Window installation runs on a sequence, and each stage has its own clock. Treat any quote that gives you one number as an estimate of the install hour alone, not the project. Here’s how the stages stack up for a typical Boulder City job in 2026, working from the day you sign a written quote:
- Measured survey: 1 day (often booked within a week of your first call). A technician measures every opening, checks the frame and sill, and confirms the wall type. This produces a document you keep. At Sightline, the price on this document is the price on your invoice.
- Permit pull: 3 to 7 business days. The City of Boulder City reviews window replacement permits through its building department. Straight like-for-like swaps move faster than jobs that change opening sizes or add egress windows.
- Product lead time: 0 to 6 weeks. Stock sizes from PGT or CGI can often be pulled from a regional distributor within a week or two. Custom sizes, geometric windows, and impact-rated units typically carry a four- to six-week factory lead time.
- Install day(s): 1 to 3 days for a whole-house job. Most homes with eight to fifteen openings finish in one to two days. Two-story homes and stucco-over-frame construction sit at the longer end.
- Inspection: scheduled within a few days of completion. The building inspector confirms flashing, fastening, and egress. A documented photo record of the install backs up what the inspector sees.
Add those stages together and a same-size replacement in a standard Boulder City ranch home lands at roughly two to three weeks. A custom job lands at six to eight weeks. The difference between those numbers isn’t labor. It’s the product clock and the permit clock.
How Wall Construction Changes Install Time
Wall construction is the variable most estimates ignore and the one that most reliably changes your install day. A window set into wood frame and a window set into grouted masonry block are not the same job, even when the window is identical.
- Wood frame with siding: the fastest wall to work in. A crew can typically set and flash three to four openings per technician per day. Removal is clean and the replacement trims back into the existing siding easily.
- Stucco over wood frame: common in Boulder City’s mid-century neighborhoods. Expect to add roughly 30 to 60 minutes per opening. The stucco has to be cut back cleanly, the flashing integrated into the weather barrier, and the patch matched. A rough stucco cut on a previous job is the single most common reason a Boulder City install day extends by several hours.
- Masonry block (CMU): the slowest wall type. Anchoring into block, sealing the sill, and dealing with the thicker wall section push install time up by roughly 50 to 100% per opening compared with wood frame. Block walls also make it harder to correct a rough opening that was framed wrong.
We’ve watched a scheduled two-day install stretch to three on a Boulder City home simply because the survey assumed wood frame and the wall under the stucco turned out to be block. That’s not a crew problem. It’s a survey and wall-type problem, and it’s caught in the field or it’s caught on install day. Catching it in the field is cheaper.
What “Special Order” Means in Boulder City

Not every window is made to order, and knowing which is which tells you whether you’re planning around a distributor or a factory. Boulder City’s housing stock skews toward mid-century ranch construction, and many of those homes have opening sizes that don’t match today’s stock catalog. A 1950s three-foot-by-five-foot single-hung is common, but oddball half-inch variations are common too, and those variations are where the clock changes.
- Stock at regional distributors (roughly 1 to 2 weeks): standard single-hung, double-hung, and picture windows in common sizes, in the colors and glass packages distributors stock. PGT and CGI both carry regional stock lines that shorten the wait for straightforward replacements.
- Factory lead time (roughly 4 to 6 weeks): anything non-standard. Geometric and arched units from ViewLux, custom-color finishes, impact-rated glazing on a size the distributor doesn’t stock, oversized sliders, and any unit where the rough opening needs a made-to-fit frame.
Here’s the practical consequence. If you want your windows installed before a Boulder City summer heat wave, order stock sizes four weeks out and special-order sizes eight weeks out. If you’re inside a six-week window and haven’t ordered yet, plan on post-summer install. The installation crew can’t move faster than the factory ships.
Single-Day vs. Phased Installs: Which Fits Your Household
Most Boulder City homeowners want the whole job done at once. Sometimes that’s the right call. Sometimes it isn’t, and the decision is really about whether you can live in a house with several openings cut open at once.
A single-day install works well when:
- Most or all of your windows are on one floor and the house is wood frame or stucco over frame.
- You can be out of the house for a working day, or you can tolerate a crew moving through adjacent rooms in sequence.
- The weather is mild, so a few hours of open openings won’t overheat the house.
A phased install (typically two to four days spread over a week or two) works well when:
- You have young children or a home office that can’t be disrupted by a crew working in the same room.
- You’re replacing a mix of stock and special-order windows, and the stock ones are ready first.
- You have second-story windows that require ladder or lift setup, which slows the day.
We decide this at the survey, not on install morning. Phased jobs are more administrative, because each phase needs its own coordination, but they’re not more expensive when planned from the start. The cost of a phased project comes from a change mid-job, which is why the window replacement in Boulder City survey lists every opening and the install sequence up front.
How a Documented Survey Prevents Timeline Surprises

The single biggest driver of a slipped install day is a hidden condition that wasn’t measured before product was ordered. In our experience, that’s not bad luck. It’s a survey that skipped a field measurement, or a quote that was priced off a photo instead of a visit. Here are the field measurements that catch hidden conditions before install day:
- Rough opening dimensions at three points per side: out-of-square openings are the number one source of a window that won’t fit as ordered. Measuring only the center hides a bow in the frame.
- Sill plate and frame inspection: a flashlight and a probe find rotted sill plate, which is a common failure in older wood-frame homes. If it’s soft, the install day adds framing work and roughly a day.
- Wall type identification: cut into the stucco or check a wall section to confirm wood frame versus block. Guessing wrong changes install time by a factor of one and a half.
- Sightline and header height: if you’re moving an opening to a new location, the header has to be sized and the permit has to reflect it. That’s a different permit path and a different lead time.
- Flashing and weather-barrier condition: a 20-year-old stucco facade often has water intrusion behind it. Catching it in the survey means budgeting for it, not discovering it mid-install.
This is why our measured survey and the written quote are the same document. The document you get on survey day is the document the crew installs to and the document the invoice matches. You can read more about that process on our Sightline Windows & Doors Boulder City home page.
Hidden Conditions That Add a Day
Some surprises are unavoidable. But most of the conditions that add a day to a Boulder City install can be identified in the survey, which is exactly why the survey comes before the product order. The ones we see most:
- Rotted sill plate or framing: soft wood behind the old window. Framing repair adds roughly half a day to a full day, depending on how many openings are affected.
- Failed flashing at the wall junction: water has been getting behind the window for years. The fix is flashing repair plus new weather barrier, and it’s a day’s work on a few windows.
- Out-of-square rough openings: the new unit needs a frame or a size adjustment, which can’t be done on install day if it wasn’t measured on survey day. A missed measurement here means a returned product and a re-order.
- Wall-type mismatch: assuming stucco over frame and finding block. This is the factor-of-one-and-a-half problem again, and it’s the reason we probe the wall on survey day.
- Unpermitted past work: a previous remodel that added an opening without a permit. Bringing the opening into compliance takes time with the building department, even if the physical install is a day.
Every one of these is a known condition in Boulder City’s older neighborhoods. A surveyor who probes the sill and cuts into the stucco finds them. A surveyor who measures and leaves misses them. The difference is roughly one documented visit.
The Inspection Stage

After the crew sets, flashes, and trims the final window, the job isn’t done until it passes inspection. In Boulder City, window replacement permits are inspected for flashing, anchoring, and egress. Egress windows (required in bedrooms, and worth confirming on any planned opening change) are typically checked for both clear opening size and sill height. The inspection is scheduled within a few days of install completion.
Our crews take a documented photo record at every stage: rough opening, flashing, anchoring, and finished install. If an inspector asks a question, the evidence is already on file. That doesn’t change your timeline, but it does mean an inspection issue gets resolved with a document rather than a second site visit. If the inspector does flag something, the 365-Day Done Right Promise covers the correction: if it’s not done right, we make it right, and that’s written into the Haven Standard, not offered as a courtesy.
Common Mistakes to Avoid
- Planning around a per-window number. “One to two hours per window” ignores permit time, lead time, and wall type. Plan the stages, not the per-window figure.
- Ordering special-order product before the survey. If the survey finds a rotted sill or a wall-type mismatch, the order is wrong and the lead time restarts. Survey first, then order.
- Assuming Boulder City stock sizes match your home. Mid-century ranch homes often have opening sizes that don’t match today’s catalog. That’s not a defect. It’s a lead-time variable.
- Booking install during the hottest weeks. Open openings plus a stucco-and-frame install in July heat is hard on the house and the crew. Schedule to avoid the peak if your timeline allows.
- Skipping the flashing question. Ask what the survey looked at on the wall junction. A stucco facade over 20 years old is where water gets in, and it shows up as a timeline surprise on install day.
- Letting the quote and the invoice drift apart. The price on the signed quote should be the price on the invoice. If a company quotes verbally or from a photo, you can’t bank on either number. The founding principle here is that the measurement and the quote are the same document, and that’s precisely the mistake to look for when you compare bids.
- Skipping the permit. A permit takes days to pull and a few minutes to skip. The resulting resale problem and inspection liability take weeks. Pull the permit and use it to protect your own timeline and your home’s record.
If you’ve already collected a written estimate from another contractor and want a second set of eyes before you sign, our free second opinion service reviews any competitor’s written quote at no charge. The point is to catch a per-window answer that skipped a stage.
When to Call a Professional

Window installation is roughly a day per floor on a typical Boulder City house, but the schedule risks sit in the wall, the sill, and the permit, and those are the parts that need a trained eye before you commit. Call a professional if your home is older than about 40 years, if a previous owner added or moved an opening without documentation, if your stucco shows cracking or staining near a window, or if you’ve been quoted a single per-window number and want a stage-by-stage scope in writing. On second-story openings and any job that involves egress windows, the anchoring and flashing work is a real safety matter, not a weekend project, and it should be done by a licensed, background-checked crew under permit. Sightline Windows & Doors Boulder City offers free estimates in Boulder City, with a written price before any work starts. Call (833) 847-4018.
Frequently Asked Questions
Most whole-house window replacement projects in Boulder City run one to two days on install day, with roughly two to three weeks total from signed quote to finished job when the sizes are stock. Add four to six weeks if your openings require special-order product. The install itself is the fast part; the survey, permit, lead time, and inspection stages are what fill the calendar.
Yes. The City of Boulder City building department reviews window replacement permits, and the process takes roughly three to seven business days for a like-for-like swap. Jobs that change opening sizes, add an opening, or require egress confirmation typically take longer. Pull the permit; it’s part of planning your schedule accurately.
The difference is almost always wall construction and opening height. A wood-frame single-story home with standard-size stock windows finishes in one day. A stucco-over-frame home with a rotted sill, a second-story opening, or special-order units can take two to three. Same windows, different wall and different survey findings.
Yes, most homeowners do. The crew works room by room, and the openings are cut and reset in sequence rather than all at once. On a phased install, we set the order so high-traffic rooms like kitchens and bedrooms finish early. The main inconvenience is noise and a few hours of open openings on the day that room is worked, not an all-day evacuation.
If the problem is something the survey should have caught and we missed it, the 365-Day Done Right Promise covers the correction: if it’s not done right, we make it right. Read more about that on our window installation in Boulder City page. In practice, most hidden conditions (rotted sill, failed flashing, wall-type mismatch) are caught in the survey, which is the whole reason the survey comes before the product order.
A standard exterior door replacement typically takes four to eight hours, roughly half a day, for a single door in good condition. A door that needs re-framing, or a patio slider on an opening that requires new header work, can run a full day or more. The same stage structure applies: survey, permit, lead time, install, inspection. Our door installation in Boulder City page covers the door-specific variables.
The Bottom Line

Window installation is fast. Planning it correctly is the slow part. The stages are the schedule: a measured survey day, a three- to seven-day permit pull in Boulder City, a zero- to six-week product lead time depending on whether your sizes are stock or special-order, one to three install days depending on wall construction and story height, and an inspection within a few days of completion. Plan each stage and you’ll know your real install window instead of blocking a vague “install week.” Get the measured survey in writing before you order product, ask what the surveyor checked at the wall junction, and confirm the written price matches the invoice before work starts.
Sightline Windows & Doors works from eight manufacturer lines, including PGT, CGI, and ViewLux, and specifies product by what the opening requires rather than by what’s in stock. Our technicians have up to 14 years of experience, are background-checked, uniformed, and identified by license number before arrival under Haven Clause 3 (Verified Crews). Every job runs under the Haven Standard, leaves a documented photo record, and is covered by the 365-Day Done Right Promise.
If you want a stage-by-stage timeline for your own openings, in writing, with a price you can hold us to, call us at (833) 847-4018 for a free estimate at your Boulder City home.
Written by the team at Sightline Windows & Doors Boulder City.
Six Reasons Homeowners Choose Sightline Windows & Doors Boulder City
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Boulder City Services
